Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 55)

l
If the button beneath the Date/Time softkey is pressed, the Date/Time Dialog is displayed.
l If the button beneath the Config softkey is pressed, the Config Dialog is displayed.
l If the button beneath the Secure softkey is pressed, the Secure Dialog is displayed.
l If the button beneath the Back softkey is pressed, the Setup Menu Selection is displayed.
Date/Time Dialog
When Date/Time is selected, the Date/Time Dialog is displayed. See Figure 73 . This option sets the library date and time.
Figure 73. Setup > Utils > Date/Time Dialog
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l
If the button beneath the Up softkey is pressed, the value of the current field is increased.
l If the button beneath the Down softkey is pressed, the value of the current field is decreased.
l If the button beneath the Next softkey is pressed, the next field in the list is made the active field. If the next field is the last field, see
Figure 74 .
l
If the button beneath the Cancel softkey is pressed, the Utils Submenu is displayed.
Figure 74. Setup > Utils > Date/Time > Sync Dialog
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the value of the fields is accepted.
l If the button beneath the Yes/No softkey is pressed, the value of the current field is toggled.
l If the button beneath the Next softkey is pressed, the active field reverts to the first field in the list.
l If the button beneath the Cancel softkey is pressed, the Utils Submenu is displayed.
Field Value Description
Year 00 .. 99 The year of the century
Month 1 ..12 The month of the year
Day 1 .. 31 The day of the month
Hour 0 .. 23 The hour of the day
Min 0 .. 59 The minute of the hour
Sec 0 .. 59 The second of the minute
Sync interface
Yes Enable synchronization
No Disable synchronization (default setting)
Field Value Description
Sync interface
Yes Enable synchronization
No Disable synchronization (default setting)