Dell PowerVault 136T LTO/SDLT (Tape Library) - Manual (Page 48)

l
If the button beneath the Cancel softkey is pressed, the Drives Submenu is displayed.
Figure 54. Command > Drives > Unload > Command in Progress Dialog
The selected drive unloads the tape, and the picker places the tape in its home position. The Command Complete Dialog is displayed. See
Figure 55 .
Figure 55. Command > Drives > Unload > Command Complete Dialog
Reset Dialog
When Reset is selected, the Reset Dialog is displayed. See Figure 56 . This option is used to reset the selected drive.
Figure 56. Command > Drives > Reset Dialog
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the current fields are accepted and the Command in Progress Dialog and the Command
Complete Dialog are displayed.
l
If the button beneath the Change Drive softkey is pressed, the selected drive is changed to the next drive.
l If the button beneath the Next softkey is pressed, the next field is made active. Refer to Figure 57 .
l If the button beneath the Cancel softkey is pressed, the Drives Submenu is displayed.
Figure 57. Command > Drives > Reset > Reset Type Dialog
Field Value Description
Drive 01 .. 06 Number of the drive to be reset
Reset type
SOFT Issues a drive reset command
HARD Removes power from the drive