Dell PowerVault 136T LTO/SDLT (Tape Library) User Manual
Page 91
Figure 8. Configuration Dialog
If the user changes the configuration, the Confirm Configuration Changes dialog appears. This dialog displays the old configuration and any
changes. See
Hyperlink
Description
Configuration
The Configuration tab displays the current configuration status of the RMU and user account. The
fields and values that are associated with this tab are indicated below.
Hostname
This field value indicates the Hostname used for the RMU configuration.
IP Address
This field value indicates the Internet Protocol (IP) address for the RMU connection.
Subnet Mask
This field value indicates what subnet an IP address belongs to.
Gateway
This field value indicates the Gateway address used for RMU communication.
SNMP Alerts
This field value indicates the state of the SNMP Alert notification. The value is either On/Off.
SNMP Server
This field value indicates the SNMP server address.
Public Name
This field value indicates the SNMP Read community string.
Private Name
This field value indicates the SNMP Set community string.
Management Action
This pull down menu allows the user to select the type of action to be accomplished.
No Action
This selection indicates that no change should be made.
Create User
This selection indicates that a new user is to be created. This can only be done by the SA.
Change User
Password
This selection indicates that the user password will be changed.
Delete User
This selection indicates that the current user will be deleted. This can only be done by the SA.
User Name
This section allows the user to perform management actions on the user selected.
Edit New
This section allows the user to enter a new User Name.
Select One
This pull-down menu allows the user to select a user name that has already been created. Only the
current user name is listed unless the SA is logged on.
Password
The user enters his password.
Re-enter Password
The user types his password in again for verification.
Date (mm/dd/yy)
This field value allows the user to change the current date.
Time (hh:mm)
This field value allows the user to change the current time.
Submit
The user submits the configuration data for verification and allows the user to confirm any
configuration changes.
Reset
This button will clear all the changed fields.