ADS Environmental Services IntelliServe 2.8.1 950026A7 User Manual

Page 277

Data Entities B-9

CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract

QPSFILL

Quantity Pump
On/Off and Wet
Well Volume

This represents the flow rate calculated by
the pump station monitor based on the
pump on and off times and wet well
volume.

QPSRUN

Quantity Run
Time

This represents the flow rate calculated by
the pump station monitor based on pump
run times.

QTHRESHOLD

Quantity
Threshold

This represents a quantity threshold
calculated by the monitor based on
historical flow patterns. It is updated
continuously based on flow conditions at
the monitoring point. Typically,
QTHRESHOLD is set to 25 to 30% below
the normal flow rates at the monitoring
point. If the monitor readings fall below
the threshold, IntelliServe generates a
Flow Loss (detected by monitor) alarm.

RAIN

Rain

This represents rain totals collected from a
rain gauge.

RAIN_ALERT

Rain Alert

This indicates that the rain intensity value
has crossed the user-defined threshold for
alarming or returning to normal.

RAINI

Rain Intensity

This represents the rain total per
configured unit of time.

RAINI_UK

Rain Intensity
(United
Kingdom)

This represents the rain intensity based on
the standards applied in the United
Kingdom.

RAWVEL

HST

Raw Velocity

This represents peak velocity data from the
monitor.

RAWVEL2

HST

Raw Velocity2 This represents peak velocity data from a

second velocity sensor.

SAMPLE

Samples

This indicates when the monitor triggered
a water-quality sampler to take a sample.

SDEPTH

HST

Smart Depth

This represents a single ultrasonic reading
derived by a special (Smart) algorithm in
the monitor using all 12 ultrasonic depth
sensor readings.