ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 130)

5-56 IntelliServe

User’s Guide
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
Viewing Pump Times
This section describes how to generate hydrographs and tables based on pump
time event data from flow monitors. Pump times represent the times at which the
pumps associated with pump stations turn on and off. IntelliServe enables you
to graph and list the times at which designated pumps turn on and off within a
specified interval. You can view pump time data for a single location, multiple
monitoring points/ locations, and a location group.
Viewing Pump Time Data for a Location
The following section describes the process for viewing pump time data from a
single flow monitor location.
Note: For instructions on viewing pump time data for multiple
monitoring points or location groups, refer to Viewing Pump Time Data
for a Location Group on page 5-59.
1. Select Locations > Flow Monitors from the System Menu.
IntelliServe displays the Flow Monitors window listing all the flow monitors
currently in the database.
2. Click on the flow monitor for which you want to view pump time data.
The Flow Monitor Current Data window displays for the selected location.
3. Click on the View Monitor Readings tab, and then click on the Pump
Times tab.
The Flow Monitor Pump Times window displays.