ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 185)

7-24 IntelliServe

User’s Guide
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
Creating Flow Monitor Adjustment Factors
Create an adjustment factor(s) for a specific flow monitor location from the Flow
Monitor Adjustment Factors window in the following way:
Note: To create or modify adjustment factors in IntelliServe, you
must have the appropriate permissions.
1. Select Locations > Flow Monitors from the System Menu.
The Flow Monitors window displays.
2. Right-click on the flow monitor for which you want to create an adjustment
factor(s), and then select the Adjustment Factors option from the menu.
The Flow Monitor Adjustment Factors window displays the adjustment factors
stored in the database for the selected flow monitor.
Flow Monitor Adjustment Factors window
3. Select the monitoring point for which you want to create an adjustment
factor from the Monitoring Point drop-down list. The Adjustment Factors
and Adjustment Factor History sections display the existing factor
information corresponding to the selected monitoring point.