ADS Environmental Services IntelliServe 2.8.1 950026A7 User Manual

Page 276

B-8

IntelliServe



User’s Guide

CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract

QCONTINUITY

Quantity of Flow
(Q = A (wetted
area) (Unidepth)
x V (Vavg)

This represents the flow quantity generated
by IntelliServe based on Unidepth and
average velocity.

QEXCESS

Quantity
Threshold

This represents the designated flow
quantity thresholds used in IntelliServe
Excess Reports.

QFINAL

Finalized
Quantity Data

This represents finalized quantity data that
has been edited and processed by a data
analyst.

QGROSS

Quantity of Flow
(Q=A (wetted
area)
(Dprocessed) x
V (Vprocessed)

This represents the flow quantity generated
by IntelliServe based on processed depth
and velocity values.

QMANNING

QManning

This represents the flow quantity
calculated using the standard Manning
equation.

QMANNING_SAG

QManning Sag This represents the flow quantity

calculated using a modified Manning
equation developed by ADS. It often
reflects flow conditions better than the
standard Manning equation.

QMLI_AVG

Averaged MLI
Flow Quantity

This represents the average of two or more
flow rate readings calculated by the
monitor using the Unidepth and average
velocity readings in conjunction with the
pipe dimensions.

Q2MLI_AVG

Averaged MLI
Flow Quantity2

This represents the average of two or more
flow rate readings calculated by the
monitor for the second monitoring point
using the Unidepth and average velocity
readings in conjunction with the pipe
dimensions.

QNET

Quantity Net

This represents the net flow for a specific
monitoring point calculated through
IntelliServe.