ADS Environmental Services IntelliServe 2.8.1 950026A7 User Manual
Page 179

7-18
IntelliServe
User’s Guide
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
Flow Monitor Coordinates window
Configure using
− Latitude/Longitude Choose this radio button if you want to use
the latitude/longitude method for geographic location
identification.
− GPS Choose this radio button if you are using the global
positioning system (GPS) method of geographical location
identification which employs use of the Universal Transverse
Mercator (UTM) coordinates system.
Latitude/Longitude
− Latitude This represents the geographic latitude of the location
at which the flow monitor is installed.
− Longitude This represents the geographic longitude of the
location at which the flow monitor is installed.
− Elevation This represents the geographic elevation of the
location at which the flow monitor is installed.
GPS
− Zone This identifies the UTM zone for the flow monitor when the
GPS method of geographical identification is being used.
− Northing This number identifies the UTM y-coordinate for the
flow monitor.
− Easting This identifies the UTM x-coordinate for the flow
monitor location.