ADS Environmental Services IntelliServe 2.8.1 950026A7 User Manual
Page 271

Data Entities B-3
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
CHECK_V2
T
Check Velocity
This event (Irregular Velocity Sensor)
indicates potential problems with the
velocity sensor at the second monitoring
point evidenced by an inconsistency
between current readings and historical
data.
CROSS_DEPTH
HT
(detected by monitor)
Cross Check
Depth
This event indicates that an inconsistency
exists between the readings obtained from
two different depth entities at the same
monitoring point for the same date/time
stamp.
CROSS_VELOCITY
HT
(detected by monitor)
Cross Check
Velocity
This event indicates that an inconsistency
exists between the readings obtained from
two different velocity entities at the same
monitoring point for the same date/time
stamp.
CUMULATIVE_RAIN
HT
Cumulative Rain This represents the rain total for a user-
defined time period.
DEPTH_A1 through
DEPTH_A12
HST
Analog Input
Depth
These represent the depth data values
returned from an analog input device.
DFINAL
HST
Final Depth
Data
This represents finalized depth data that
has been edited and processed by a data
analyst.
DPREPROCESSED
HST
Preprocessed
Depth Data
This refers to raw depth data retrieved
from the monitor.
DPROCESSED
HST
Processed Depth
Data
This represents the depth data generated
after IntelliServe applies scrubbing to the
Dpreprocessed data, provided the Enable
Data Scrubbing option is selected for the
location. If it is not, DPROCESSED will
share the same values as
DPREPROCESSED.
DMLI_AVG
HST
Monitor Level
Intelligence
(MLI
®
) Depth
Average
This represents the average of two or more
Unidepth readings from the monitor. This
average is calculated by the monitor and
collected by IntelliServe.