ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 70)

Sensor Installation and Connection 3-9
Quantity Description ADS P/N
Up to 2
(1 per
monitoring
point)
Surface Combo Sensor – downward ultrasonic
depth sensor, surcharge pressure depth
sensor, surface velocity sensor, & surcharge
peak velocity sensor
8K-CS5 –V2-xx-
30/1H (30-ft./9.1-m
or 100-ft./30.5-m
cable) 2
Up to 2
(1 per
monitoring
point)
Ultrasonic depth sensor (downward ultrasonic
depth only)
8K-CS5-D1-00-30
(30-ft./9.1-m cable)
1 as
needed
IS standard or custom sensor extension cable
for Ultrasonic Depth Sensor
8000-0023 –xxx 3
1 as
needed
IS Standard or Custom Sensor Extension
Cable for Peak Combo and Surface Combo
Sensors
8000-0025 –xxx 3
as needed ¼-  2 ¼-in. stainless steel anchor bolts w/ nut
and washer
1 3/8-inch x 3-inch anchor bolt and nut
1 Replacement dryer tube 3704 –0032
1 IS PC communication USB Serial Cable 8000-0337
1 Antenna for wireless communication 3800-0162 or
3800-0163
1 as
needed
Magnet (for activating diagnostic codes in the
monitor through the LED STATUS window)
8000-0140
1 as
needed
SIM card (for monitor modem) 507181
1 as
needed
External Power and Communications Unit
(ExPAC)
8000-0377
1 as
needed
24V DC power supply 508293
1 as
needed
External Modbus Interface Unit (XBUS) 8000-0427
1 as
needed
External Input and Output Device (XIO) 8000-0400
1 as
needed
External power/communications cable (from
ExPAC to monitor)
8000-0378-xxx 4
1 as
needed
External power grounding kit (also used to
convert a battery-powered TRITON+ monitor to
external power)
8000-0434-xxx 4