ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 123)

3-62 ADS TRITON+ Manual
SLIDING ADAPTER BRACKET
ULTRASONIC DEPTH SENSOR
ANGLED SURCHARGE BRACKET
ULTRASONIC DEPTH SENSOR
Attaching the Ultrasonic Depth Sensor to the Sliding Adapter Bracket
Note: Secure the sensor cable with cable ties to keep the
sensor in place.
13. Verify that the sensor portion of the bracket is level using a
carpenter’s level. To protect the crystals on the sensor, use a
block of wood of uniform dimensions between the level and the
flat face of the horizontal, ultrasonic depth sensor portion of
the sensor! If it is slightly out of level, make horizontal
adjustments to the bottom portion of the bracket by moving it
to the left or right. The oval bottom mounting holes allow
minor horizontal adjustments.