Installing the sim card – ADS Environmental Services ADS TRITON+ QR 775027 A3 User Manual
Page 142

Communication
4-11
INSTALLATION RING
ULTRASONIC DEPTH SENSOR
PEAK COMBO SENSOR
FLOW
SURFACE COMBO SENSOR
OR
ANTENNA
CABLE CHANNEL
CORBEL
ANTENNA CABLE
TRITON+ MONITOR
TM
Installation with antenna cable coiled in manhole
14. Seal the space between the antenna cable and the corbel hole
with electrical duct seal or as required to prevent infiltration
into the manhole.
Note: Do not connect the antenna cable to the monitor
until after installing the SIM card.
Installing the SIM Card
The modem in the TRITON+ requires a SIM card for establishing
communication. This modem supports SIM cards provisioned by
many different carriers, including SIM cards provisioned by AT&T
(ADS p/n 507181) for public, static IP address operation as well as
SIM cards provisioned by other carriers for dynamic IP address
operation. Please contact ADS or IETG if you have specific
questions about your SIM card provider and compatibility of the
provider’s SIM card with the TRITON+ monitor.