ADS Environmental Services ADS TRITON+ QR 775027 A3 User Manual
Page 137

4-6
ADS TRITON+ Manual
Masonry drill bits for drilling through manhole wall, corbel,
other materials. Include the following:
0.5-inch (13-mm) diameter (minimum) x 12-inch (305-
mm) long (minimum) bit
0.5-inch (13-mm) diameter x 36-inch (914-mm) long
(minimum) bit
1.25-inch (32-mm) diameter x 12-inch (305-mm) bit
Standard drill bits and masonry bits up to 0.6 inches (15 mm) in
diameter
Medium- to heavy-duty hammer drill (if no hammer/drill mode
is available on the demolition hammer)
Trowel or putty knife for scooping asphalt
Hammer
Carpenter’s rule
Pen, pencil, or chalk for marking asphalt or concrete
Shop vacuum
Wire brush
Alcohol wipes
Leather work gloves
Protective goggles
Heavy-duty, high-quality caulking gun (for regular-sized tubes)
Appropriate tools for cutting and removing tarmac or dirt for
burying antenna
Patching and sealing materials for tarmac and for sealing the
cable hole into the manhole
Cable ties for securing cable coils
Generator or other power source (for hammer drill)
Dry sand