ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 251)

6-64 ADS TRITON+ Manual
Editing the Analog Device
Use the analog device for TRITON+ monitors to configure up to
eight 4-20mA analog channels in any combination of analog inputs
or analog outputs. Define incoming analog signals and store the
value as AI_1 through AI_8 (at the monitor's sample interval).
Define analog outputs from a list of available data entities and
output the corresponding data value to an external analog device.
Note: The analog device is a custom configuration. Please
consult ADS prior to wiring and configuring this device.
Analog Device properties dialog
Configure the analog device for a TRITON+ using the following
information:
 # Displays the channel number associated with the analog
input or output. Can be modified, if necessary.
 ID Input the Modbus identification corresponding to the
external analog Modbus module. This value is typically found
in the customer's external analog module's user guide.
 Input/Output Select whether the attached analog device is
for analog inputs or analog outputs.
 Register Enter the Modbus register corresponding to the
external analog Modbus module. This value is typically found
in the customer's external analog module's user guide.