beautypg.com

ADS Environmental Services ADS TRITON+ QR 775027 A3 User Manual

Page 303

background image

Analog and Digital I/O 8-17

2. Connect the digital output wires to the ADS XIO in the

following way:

Note: Make sure the power is turned off to the third-party
device and XIO.

 Release the latches and open the clear, front door on the

XIO.

 Run the wires up through the left cable gland on the XIO

into the enclosure. ADS recommends using 18-gauge
wiring. You may need to loosen the plastic nut on the
cable gland on the outside of the XIO to feed the wires
through.

XIO MODULE

CABLE GLAND

2 WIRES

Feeding wires up through left cable gland in XIO