ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 194)

Configuration and Activation 6-7
Configuring the Monitor Location
To ensure the most efficient and useful results for each monitor
location, the user must activate the TRITON+ flow monitor with the
proper configuration information to satisfy the specific monitoring
needs of the project and to reflect actual site conditions. The
configuration information includes critical details such as the
monitor name, series, pipe size and shape, sensor assignment and
parameters, and data sample rate.
Users input the configuration details for each monitor into Qstart.
The configuration details for each is stored in a Location
Information File (LIF) on the user’s local directory or network
drive. After the monitor configuration process is completed, user’s
must then perform a monitor activation to download the specific
elements of the LIF to the monitor memory in order to initiate
monitor operations. Following is the general process for creating a
new monitor location.
 Create and configure a monitor location in Qstart
 Configure the monitoring point(s) for the monitor location
 Select and edit devices for the monitor location
Note: If remote communication already has been
established for the location, these activities can be
performed in cooperation between field and office
personnel. If remote communication is not available,
perform configuration and activation on site through direct
communication with the monitor.
Create and Configure the Monitor Location
Entering the monitor information is the first step to creating a new
monitor location. The following steps describe the process for
entering the information and designating the parameters for an
existing location: