ADS Environmental Services ADS TRITON+ QR 775027 A3 - Manual (Page 327)

10-6 ADS TRITON+ Manual
monitor top for 1 to 2 seconds and then removing the magnet from
the top. The sequence cannot begin until the magnet is removed.
Proper location for magnet on monitor top
Note: ADS does not recommend initiating the diagnostic
code sequence while codes representing monitor activity
are displaying in the window. Therefore, verify that the
LED window is blank before attempting to activate the
code sequence. In addition, make sure the LED window is
in clear view before initiating the code sequence.
Note: Activating the diagnostic codes using the magnet
also wakes up and resets the modem in the monitor. When
communication issues arise, the monitor often will resume
wireless communications after the diagnostic codes are
activated.