Metrohm 862 Compact Titrosampler - Manual (Page 92)

6.7 Configuring external devices ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
82 ￭￭￭￭￭￭￭￭ 862 Compact Titrosampler
Editing the COM1 settings
Under COM1 settings the interface parameters for the connected bal-
ance are set.
Baud rate
Transfer rate in characters per second.
Selection 1200 | 2400 | 4800 | 9600 | 19200 | 38400 |
57600 | 115200
Default value 9600
Data bits
Number of data bits.
Selection 7 | 8
Default value 8
Stop bits
Number of stop bits.
Selection 1 | 2
Default value 1
Parity
Type of parity testing.
Selection even | none | odd
Default value none
Handshake
Type of data transfer protocol.
Selection hardware | software | none
Default value hardware
Note
In case of communication problems, try the software handshake (soft-
ware).
Editing the COM2 settings
Under COM2 settings the interface parameters for devices connected to
the RS-232/2 connector of the RS-232 USB Box are set (e.g. PC). The
parameters and input ranges are the same as for the COM1 interface.