Metrohm 862 Compact Titrosampler - Manual (Page 21)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
862 Compact Titrosampler ￭￭￭￭￭￭￭￭ 11
3.2 Removing the safety shield and cable cover
1
1
2
Figure 3 Removing shields
If you remove the safety shield and the cable cover before, the installation
of the accessories is easier to carry out. Proceed as follows:
1 Loosen the knurled screws on the sides of the tower and remove the
safety shield.
2 Loosen the knurled screws on the rear of the tower and remove the
cable cover.
Do not forget to refasten these two shields after the installation of the
accessories.
3.3 Mounting the Dosino
The 800 Dosino is used for adding titrant. The titrant bottle can be placed
next to the tower of the 862 Compact Titrosampler.