Metrohm 862 Compact Titrosampler - Manual (Page 36)

3.11 Mounting the cable cover and the safety shield ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
26 ￭￭￭￭￭￭￭￭ 862 Compact Titrosampler
3.11 Mounting the cable cover and the safety shield
After having installed all accessories you can remount the shields. Proceed
as follows:
1
2
2
Figure 23 Mounting the shields
1 Mount the cable cover
Fasten the cable cover with the four red knurled screws to the rear of
the tower. Ensure that all cables and tubings are routed in order.
2 Mount the safety shield
Fasten the safety shield with the four black knurled screws to the
sides of the tower. When each of the lower knurled screws is slightly
loosened, the safety shield can be folded up if needed.
Warning
The 862 Compact Titrosampler may not be operated without a safety
shield!