Metrohm 862 Compact Titrosampler - Manual (Page 55)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Operation
862 Compact Titrosampler ￭￭￭￭￭￭￭￭ 45
3 Export the method
￭ In the function bar, select Export and press [OK].
The method is exported. The directory structure on the USB stick is
listed in chapter 6.6, page 79.
5.5 Sample data
You can enter the sample data (identification, sample size, etc.) in a vari-
ety of ways:
￭ Use of the sample table. This is particularly useful with sample series.
￭ Directly in the main dialog, if the same sample data is to be used for an
entire sample series.
￭ Automatic request immediately after the start of the determination.
This is only useful with single determinations.
You can also send the sample size and the unit from a connected balance
in any case. With some balances, the sample identification and the
method can be sent in addition to the sample size.
5.5.1 Sample table
The sample table is a table in which the sample data for up to 99 samples
can be entered. The sample data can also be entered while a determina-
tion is running (see Chapter 5.7.2, page 54).
The sample table contains numbered lines. The identification (ID1) and
the sample size of each sample are displayed.
Edit
Edit data of the selected line
Delete
Delete the selected line from the sample table.
Insert
Insert a new line above the line selected.