Metrohm 862 Compact Titrosampler - Manual (Page 61)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Operation
862 Compact Titrosampler ￭￭￭￭￭￭￭￭ 51
A function bar with the entry "Hold" is displayed during the run of a sam-
ple series in the so-called "Live" dialog.
1 Press the [OK] key.
The method run is paused. However, currently running movements
of the sample rack or the lift will be finished.
Instead of the "Hold" function, "Continue" is displayed in the func-
tion bar.
Continuing a sample series
If a method run is pauseded, then the "Hold" status is displayed in the
title bar, see previous illustration. The sequence can be continued with the
"Continue" function.
In the "Hold" status, a method run can be stopped completely, and with
it the entire sample series, by pressing the [STOP] key.
1 Press the [OK] key.
As is also the case at the start of a sample series, a request dialog
appears here in which the number of samples to be processed can
still be changed. It is thus possible to shorten a sample series or to
extend it, without stopping it.
2 Press the [OK] key and enter the number of samples that still need to
be processed. The current sample must be taken into account.
3 Press the [START] key.