Metrohm 862 Compact Titrosampler - Manual (Page 52)

5.4 Methods ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
42 ￭￭￭￭￭￭￭￭ 862 Compact Titrosampler
2 Select a titration and measuring mode
￭ In the function bar, select New and press [OK].
￭ Select Mode and press [OK].
￭ Select the desired titration mode in the selection list and apply
with [OK].
￭ Select Measured quantity and press [OK].
￭ Select the desired measuring mode in the selection list and apply
with [OK].
3 Select an automation sequence
￭ Select Automation and press [OK].
￭ Select the desired sequence in the selection list and apply with
[OK].
￭ Press [BACK].
The method is now loaded and is displayed in the main dialog under
Method.
If a new method has been created, then the individual parameters can be
modified under Menu
▶ Parameters.
5.4.2 Saving a method
If you modify method parameters, then you can save these as a your own
method. A maximum of 100 methods can be saved.
To save a method, proceed as follows:
1 Open the method table
￭ In the main dialog, select Method and press [OK].
The method table opens: