Metrohm 862 Compact Titrosampler - Manual (Page 151)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 10 Appendix
862 Compact Titrosampler ￭￭￭￭￭￭￭￭ 141
Mettler AX
For the Mettler AX balance, the fields that contain the sample identifica-
tion or the method must be designated as follows:
￭ Designation for the field with the method name: METHOD
￭ Designation for the field with sample identification 1: ID1
￭ Designation for the field with sample identification 2: ID2
10.4 USB devices
Note
USB peripheral devices that are to be connected directly must support
the USB 1.0/1.1 (Full Speed) or USB 2.0 (High Speed) standard. The
maximum data transfer rate is however in any case 12 MBit/s.
Keyboards, PC mice and barcode readers are so-called HID devices
(Human Interface Device) and can be connected via a USB hub only.
Printers should also be connected via a USB hub. Depending on the
manufacturer or printer type a direct connection is however possible.
10.4.1 Numerical USB keypad 6.2147.000
The key [Num Lock] must be pressed for navigating in the dialog. Then
the arrow keys are effective.
The respective editing dialog must be opened for the number input.
Table 4 Keyboard assignment
Key of the 862 Compact Titro-
sampler or function in the
editing dialog Key on the numerical USB
keypad
[BACK] [Home]
[ ⇧] [⇩] [ ↑] [↓]
[ ⇦] [⇨] [ ←] [→]
[OK] [Enter]
[BS] (backspace)
Delete [Del]
Accept [Home]