Metrohm 862 Compact Titrosampler - Manual (Page 75)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Operation
862 Compact Titrosampler ￭￭￭￭￭￭￭￭ 65
Dosing a particular volume (ADD)
You can dose a particular volume with the ADD function.
Proceed as follows:
1 Open the manual control
￭ In the main dialog, select Menu and press [OK].
The main menu opens.
￭ Select the menu item Manual control and press [OK].
Manual control opens.
2 Select the dosing function
￭ Select the Dosing item.
￭ In the function bar, select ADD and press [OK].
3 Configure the dosing function
Note
￭ The dosing and filling rate should be decreased for viscous liq-
uids.
￭ The maximum dosing and filling rate depends on the cylinder
volume (see Chapter 10.1.1, page 139).
￭ Enter the desired volume.
￭ Enter the dosing rate.
￭ Enter the filling rate.