Metrohm 862 Compact Titrosampler - Manual (Page 32)

3.9 Connecting a sensor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
22 ￭￭￭￭￭￭￭￭ 862 Compact Titrosampler
Connecting a reference electrode
Figure 17 Connecting a reference electrode
Connecting a temperature sensor or an electrode with inte-
grated temperature sensor
Temperature sensors of the Pt1000 or NTC type can be connected to the
Temp. connector.
Figure 18 Connecting a temperature sensor
Note
The red plug must always be plugged into the red socket at the temper-
ature sensor for the purpose of shielding against disruptions.
If you use an electrode with an integrated NTC probe, then you must
plug the red plug into the red socket.