Modify a processbook title – Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide User Manual
Page 79

3
●
Work with a ProcessBook
●
●
●
●
●
61
Field Name
Description
Title
Extracted from the Summary Information dialog box.
Created
Original date and time the ProcessBook was saved.
Note: If the ProcessBook file is moved to another machine,
the original date and time will be preserved, however
Windows Explorer shows the date and time the file arrived on
the present machine.
Created By
Extracted from the Author field on the General tab in the
ProcessBook Preferences dialog box. Shows the original author,
unless the author’s name has been modified in the Summary
Information dialog box.
Last Saved
Most recent revision date and time.
Last Saved By
Name of the person who saved the ProcessBook most recently.
(Extracted from the Author field on the General tab in the
ProcessBook Preferences dialog box.) If this field is blank, the PC
login name of the author is used. This is useful for tracking who made
which revisions.
Revision
Number of times the ProcessBook has been revised and saved.
Displays
Total number of entries in the ProcessBook.
System Commands
Total number of operating system command entries in the
ProcessBook.
Modify a ProcessBook Title
You can change the name of a ProcessBook at any time.
1. In either Build mode or Run mode, click File > Properties. The
Summary Information (page 59) dialog box appears.
2. Under Title, type a new title.
The ProcessBook title is different from the file name established in the
New dialog box when you created the new ProcessBook. The title bar on the