Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 313)

8
●
Embedding and Linking
●
●
●
●
●
295
Edit Contents of OLE Objects
To edit contents of OLE objects:
1. Open the display.
2. In Build mode, double-click the OLE object you want to edit.
3. Review the following for additional information:
If Then
The source application permits in-place
activation, menus and commands for the
source application appear on your screen,
temporarily replacing ProcessBook menus.
Edit the object.
Save it if it is a linked file.
Click elsewhere on the display to
return to ProcessBook or press the
ESC key.
The source application does not permit in-
place activation, a new window containing the
source application appears.
Edit the object.
Save it if it is a linked file.
Close the window and return to
ProcessBook.
Delete an OLE Object from a Display
To delete an OLE object from a display:
1. In Build mode, click the OLE object you want to delete.
2. Click Edit > Clear.
Display an OLE Object with an Icon
To save space on a ProcessBook display for a linked object use an icon,
rather than a graphic representation of the data.