Rockwell Automation FactoryTalk Historian SE ProcessBook 3.2 User Guide - Manual (Page 335)

11
●
System Administrator Notes
●
●
●
●
●
317
International Date
Format Specifies date/time format.
 1=Windows format.
 0=FactoryTalk Historian Time format.
PromptForConversion  1=prompt user when opening a file created with an earlier
version, asking whether or not to convert to new format.
 0=do not prompt (default).
MaxUndoStackSize Maximum number of elements in the Undo stack (default is 200)
Build/Run Scroll Mode For each mode, set the scrolling:
 0=off.
 1=on.
 2=automatic.
GridSize Sets the Grid Size, in lines per screen unit. Default is 12.
File Access Entries FileAccessTimeout and FileAccessInterval entries, described
below, the common INI file (in \PIPC\Dat) is checked first for
these settings as opposed to the private INI files.
FileAccessTimeout Number of seconds FactoryTalk Historian ProcessBook attempts to
open a locked file (default is 5 seconds)
FileAccessInterval Number of intervals, in tenths of seconds, between attempts to
open a locked file (default is 1/10 of a second)
COMTimeOut This is the number of seconds that the ProcessBook container
waits before showing a timeout dialog box. The default is 30
seconds.
RunSelectorColor Red, Green, Blue, values can range from 0 to 255, sets the color
of the selector rectangle in run mode.