Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control - Manual (Page 149)

Rockwell Automation Publication 7000-UM202B-EN-P - June 2014 149
Component Definition and Maintenance Chapter 3
LEDs
There are two power LEDs on the ACB labeled D7 and D9:
• D9 is the ±15V DC voltage-OK signal
• D7 is the +5V DC voltage present signal.
Interface Module (IFM)
The Interface Module makes all customer-usable connections to the ACB. The
pin numbers listed on the following pages refer to IFM pin numbers.
Figure 132 - Interface Module (IFM)
ACB-TP78 OPCS Output Contactor Status
ACB-TP79 OP Output Contactor Command
ACB-TP80 BPIS Bypass Isolating Switch
ACB-TP81 BPCS Bypass Contactor Status
ACB-TP82 BP Bypass Contactor Command
ACB-TP83 DGND Digital Ground Return
Test points Name Description
Even pin numbers
Odd pin numbers
Connection to ACB (J8)