Rockwell Automation 25-COMM-E2P PowerFlex 25-COMM-E2P Dual-Port EtherNet/IP Adapter - Manual (Page 29)

Rockwell Automation Publication 520COM-UM003A-EN-E - June 2013 29
Configuring the Adapter Chapter 3
3. On a computer connected to the EtherNet/IP network, start the
BOOTP/DHCP software. The BOOTP/DHCP Server window
appears.
4. To properly configure devices on your EtherNet/IP network, you must
configure settings in the BOOTP/DHCP software to match the network.
Select Tools > Network Settings to display the Network Settings window.
5. Edit the following:
6. Click OK to apply the settings. Devices on the network issuing BOOTP/
DHCP requests appear in the BOOTP/DHCP Request History list.
Box Type
Subnet Mask
(1)
(1) For definitions of these terms, see the Glossary on page 161 .
The subnet mask for the adapter’s network.
Gateway
(1)
The IP address of the gateway device on the adapter’s network.
Primary DNS The address of the primary DNS server to be used on the local end of the link for
negotiating with remote devices.
Secondary DNS Optional – the address of the secondary DNS server to be used on the local end of the
link for negotiating with remote devices when the primary DNS server is unavailable.
Domain Name The text name corresponding to the numeric IP address that was assigned to the server
that controls the network.