Lenze CANopen Controller-based Automation - Manual (Page 99)

14 Diagnostics
14.2 "Status" tab of the connected field devices
99
Lenze · Controller-based Automation · CANopen® Communication Manual · DMS 6.3 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
14.2 "Status" tab of the connected field devices
In the »PLC Designer«, there is a Status tab for each field device integrated into the control
configuration. This tab can be used to call diagnostic information about the device.
14.3 Diagnostic codes
In the »Engineer«, you can view the diagnostic codes of the Lenze field devices.