Lenze CANopen Controller-based Automation - Manual (Page 66)

Lenze · Controller-based Automation · CANopen® Communication Manual · DMS 6.3 EN · 04/2014 · TD17
66
9 Commissioning of the CANopen Motion bus
9.1 Sample projects (Application Samples)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.1 Sample projects (Application Samples)
There already exist sample projects (device application + PLC program) for commissioning of Lenze
Controllers.
The Lenze sample projects can be found in the MS Windows start menu under:
Start  All programs  Lenze  AppSamples  ...
The Lenze sample projects can also be opened in the »PLC Designer« via the menu command File 
New project..., or using +.

Detailed information on the sample projects can be found in the following
documentation:
• SW_ApplicationSample_i700_(PLC Designer V3)_Vx-y_DE/EN.pdf
• SW_ApplicationSamples_(Controller-based)_Vx-y_DE/EN.pdf