Lenze CANopen Controller-based Automation - Manual (Page 103)

14 Diagnostics
14.5 »PCAN view« for diagnostic purposes
103
Lenze · Controller-based Automation · CANopen® Communication Manual · DMS 6.3 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
14.5.2 Setting all CANopen nodes to the "Operational" status

How to set all CANopen nodes to the "Operational" status:
1. Create the following CAN message under "New transmit message":
2. Select the CAN message in the "Transmit" window and press the once to send
the CAN message.