4 commissioning the field devices, Commissioning the field devices, Apter – Lenze CANopen Controller-based Automation User Manual
Page 39: Commissioning, The field devices, Commissioning the field devices ( 39), 8commissioning of the canopen logic bus
8
Commissioning of the CANopen Logic bus
8.4
Commissioning the field devices
39
Lenze · Controller-based Automation · CANopen® Communication Manual · DMS 6.3 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.4
Commissioning the field devices
Parameterise the Lenze field devices connected to the CANopen network by means of the
»Engineer« or »EASY Starter«.
CANopen is exclusively configured by means of the »PLC Designer«.
CANopen settings of the field devices which have possibly been carried out with the »Engineer«/
»EASY Starter« are overwritten.
Tip!
We recommend to commission each field device individually and then integrate them into
the PLC program.
There already exist sample projects (device application + PLC program) for commissioning
of Lenze Controllers.
Sample projects (Application Samples)
Documentation of the Lenze field devices
Detailed information about the commissioning of the Lenze field devices is provided
here.