beautypg.com

8commissioning of the canopen logic bus – Lenze CANopen Controller-based Automation User Manual

Page 46

background image

Lenze · Controller-based Automation · CANopen® Communication Manual · DMS 6.3 EN · 04/2014 · TD17

46

8

Commissioning of the CANopen Logic bus

8.8

Creating a control configuration (adding field devices)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Use the CANbus tab to set the baud rate.

3. Use the

Add Device to add the

"CANopen Manager MC-CAN2" to the control

configuration.

Note!

The baud rate set in the »PLC Designer« overwrites the baud rate set for the field devices

via »Engineer« or »EASY Starter«.
Always set the same baud rate for all nodes in a CANopen network.

See also other documents in the category Lenze Equipment: