8 commissioning of the canopen logic bus, 1 sample projects (application samples), Commissioning of the canopen logic bus – Lenze CANopen Controller-based Automation User Manual
Page 36: Sample projects (application samples), Commissioning of the canopen logic bus ( 36), 8commissioning of the canopen logic bus
Lenze · Controller-based Automation · CANopen® Communication Manual · DMS 6.3 EN · 04/2014 · TD17
36
8
Commissioning of the CANopen Logic bus
8.1
Sample projects (Application Samples)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8
Commissioning of the CANopen Logic bus
This chapter provides information for the commissioning of the CANopen Logic field devices in the
Lenze automation system.
Depending on the field devices used, the following
are required:
• »EASY Starter«
• »Engineer«
• »PLC Designer«
8.1
Sample projects (Application Samples)
There already exist sample projects (device application + PLC program) for commissioning of Lenze
Controllers.
The Lenze sample projects can be found in the MS Windows start menu under:
Start All programs Lenze AppSamples ...
The Lenze sample projects can also be opened in the »PLC Designer« via the menu command File
New project..., or using
Detailed information on the sample projects can be found in the following
documentation:
• SW_ApplicationSample_i700_(PLC Designer V3)_Vx-y_DE/EN.pdf
• SW_ApplicationSamples_(Controller-based)_Vx-y_DE/EN.pdf