Nanodac – Carbolite nanodac User Manual
Page 81
nanodac™
79
MC27 –EN–1.04
EXAMPLE 2:
Make the parameter ‘Loop1.PID.ProportionalBand’ read only when OEM security is enabled and the
instrument is in Supervisor access level and leave the remaining parameters in this list as read/write.
Open ‘Loop1.PID list.
Figure 3.6.10d
Open
Instrument.OEMSupervisorLi
st
Drag and drop the
parameter(s) which are
required to be read only in
Supervisor level when OEM
security is enabled.
In this example the
parameter Loop1 Proportional band.
Figure 3.6.10e