Carbolite nanodac - Manual (Page 62)

nanodac™
MC27 –EN– 1.04
60
6. iTOOLS
iTools software running on a pc allows quick and easy access to the configuration of the unit. The
parameters used are generally the same as those described in
section 5 above, with the addition of various
diagnostic parameters.
iTools also gives the user the ability to create software wiring between function blocks, such wiring being
carried out using the Graphical wiring Editor feature.
A further feature - the display mode ‘Promote List’, is populated using iTools - see section 4.4.9 for details.
In addition to the guidance given here, there are two on-line Help systems available within iTools:
Parameter help and iTools help. Parameter help is accessed by clicking on ‘Help’ in the toolbar (opens the
complete parameter help system), by right-clicking on a parameter and selecting ‘Parameter Help’ from
the resulting context menu, or by clicking on the Help menu and selecting ‘Device Help’. iTools help is
accessed by clicking on the Help menu, and selecting ‘Contents’. iTools help is also available in manual
format under part number HA028838, either as a physical manual or as a pdf file.
Figure 3 Help access