Carbolite nanodac - Manual (Page 103)

nanodac™
101
MC27 –EN–1.04
C2.2 SERVER SETUP
1. Create a new folder (directory) called, for this
example, ‘Archive’ in a suitable location such as the C
drive, or the desktop.
2.
In the Filezilla server window, click on ‘File’ and select
‘Connect to Server’.
The ‘Logged on’ message appears
3
In the Edit menu, select ‘Users’ and in the ‘General’
page, click on ‘Add’ and enter a name for the user,
then click ‘OK’. For this example, ‘GeneralUser’ has
been used, but it may be more advantageous to use
‘Anonymous’ because this is the default name in the
recorder/controller. Click on ‘OK’.
4 In the Edit menu, select ‘Users’ and in the ‘Shared
Folders’ page, click on ‘Add’
A browse window opens allowing the user to select
the new folder (‘Archive’) created in step 1, above.
When OK has been clicked to confirm the selection,
the new folder appears in the centre window (with an
‘h’ next to it to indicate that this is the home folder
for this ftp user setup.
5.
Click on the relevant folder to enable the tick boxes.
Click on all the ‘File’ and ‘Directory’ enable tick boxes,
then click OK