Nanodac – Carbolite nanodac User Manual

Page 23

nanodac™

MC27 –EN–1.04

Login (Cont.)

SUPERVISOR ACCESS LEVEL

In addition to the logged out level function, this access level allows the user to view the recorder’s
configuration, and to edit some values (such as alarm thresholds). By default, there is no password
required to enter Supervisor level, but a password can be set in the Instrument area of configuration,
either at Supervisor level or at Engineer level. (See section 1)

ENGINEER ACCESS LEVEL

This allows full access to all areas of the recorder configuration. The default password is 100, but this can
be edited in the Instrument area of configuration (See section 1).

Note: recording is stopped for as long as the user is logged in at Engineer level,
even if the recorder is not being configured. This is indicated by the Record icon
at the bottom left corner of the process value display screen being replaced by
the Configuration (wrench) icon.

LOGIN PROCEDURE

From the top level menu, use the up or down arrow keys as often as necessary in order to highlight
‘Login’, and then operate the Scroll key to produce the ‘Access Logged out’ display.

Note: this procedure describes how to login to an access level with a password associated with it.
For non-password protected logins, the user needs only to select the required access level, and
press the scroll key.

Reco rd icon

Config ur atio n
i co n

Logged out

Operator

Supervisor

Engineer

Access

Password

Accept changes

Cancel

Yes