Konica Minolta bizhub PRESS C1100 - Manual (Page 58)

Notes:
● If, at any stage, the scanning does not complete properly, click
Reset and scan again.
● If an error occurs while scanning the chart, an alert message
appears. Click OK and re-scan the chart.
After the last color separation row (black) is successfully
scanned, the Save page of the Calibration wizard appears.
11. In the Save Calibration Results area, select if you want the
calibration results saved As default name or select Save as,
and enter a name for the calibration table in the text box.
12. In the Apply to area, choose if you want the calibration table
to apply to All Media Types, or choose Select, and select the
respective media types to which you want the calibration table
to apply.
13. Click Finish.
The new calibration table is saved and applied to the next job
that prints.
14. Turn off the FD-5 by sliding the power switch to the left.
48 Chapter 3—Calibration