Konica Minolta bizhub PRESS C1100 - Manual (Page 234)

6. Click Save.
Installing the Remote Site Manager in Windows
Install the Remote Site Manager so that you can add servers,
monitor their status, and obtain information about the printer, all
from your computer.
1. On your desktop, click Start > Run.
2. In the Run dialog box, type the exact name of the server
where the Remote Site Manager is located, as follows
\\ .
3. Click OK.
4. In the D:\Utilities\PC Utilities folder on the IC-312 print
controller, locate the Remote_Site_Manager.exe file.
5. On your computer, double-click the
Remote_Site_Manager.exe file.
6. During the installation process, if a Windows Security
message appears about installing X-Rite device software, click
Install.
The Remote Site Manager is installed on your computer. The
Remote Site Manager icon appears on your taskbar after
the application is started.
7. Click OK.
The Remote Site Manager appears under Start > Programs >
Creo Server > Remote Site Manager .
Installing the Remote Site Manager in Mac OS X 10.6 (64 bit)
and later
Install the Remote Site Manager so that you can add servers,
monitor their status, and obtain information about the printer, all
from your computer.
1. From your computer, navigate to the \\
\Utilities\Mac Utilities folder on the Creo server.
2. Double-click the Remote_Site_Manager.dmg file.
The Remote Site Manager is installed on your computer. The
Remote Site Manager icon appears on your taskbar after
the application is started.
3. Click Close.
A shortcut to the Remote Site Manager appears in the path
Applications\Creo_Server_Tools\Remote_Site_Manager .
224 Chapter 13—Working with Creo server tools