Konica Minolta bizhub PRESS C1100 - Manual (Page 153)

1. Create a Print Services Facility (PSF) TCP/IP printer.
This printer will be used as the IC-312 print controller IPDS
printer.
2. Set the following options for the PSF TCP/IP printer:
a. Enter the IC-312 print controller IP address.
b. Enter 5001 for the TCP/IP IPDS port of the IC-312 print
controller.
IPDS printer parameters
Note: The IPDS workflow is available only with the Trans Pack.
You can create new IPDS printers based on the two default
printers for customizing your workflow. For each IPDS printer you
can set the following parameters:
● Configuration
● Print
● Quality
● Color
See also:
Configuration parameters on page 143
Print parameters on page 146
Quality parameters on page 148
Color parameters on page 152
Configuration parameters
Note: The IPDS workflow is available only with the Trans Pack.
IPDS printer parameters 143