Konica Minolta bizhub PRESS C1100 - Manual (Page 187)

Imposition tab in the job parameters window
Set and apply imposition settings to your job.
Parameter Option Description
Imposition
method Method Provides the following options:
● None—Imposition parameters are not available, and the
thumbnail viewer does not display an image. This is the default
option.
● Step & Repeat—A technique in which multiple copies of an
image are printed to fill up a large sheet. This method is used
mainly for business cards.
Note: The number of copies is defined according to pages or
sheets.
● Step & Continue—A technique in which different pages of a job
are printed on one sheet according to the selected layout, so
that the sheet is filled to capacity.
● Cut & Stack—A book-finishing technique in which jobs are
printed, cut, stacked, and bound in the most efficient manner to
preserve the original sorting. A job's pages, booklets, or books
are sorted in a Z-shape, (each stack of pages is sorted in
consecutive order). When stacks are piled one on top of
another, the entire job is already sorted up or down.
○ Stack size— Enables you to define the number of sheets to
place in the printer's stacker tray, according to the limitation
of the finisher present on the site.
Note: The Stack size parameter splits the job into several
logical parts. When requesting multiple copies for such jobs,
each logical part of the job is printed according to the
requested number of times, instead of the entire job
completely.
● Saddle Stitch—A book-finishing technique in which the pages
of a book are attached through stitching or stapling in the spine
fold—for example, in brochures.
○ Sets per sheet—Enables you to select the number of sets of
the job to print on the defined printable area.
○ Stacking mode for VDP—For VDP jobs only. This option
enables you to print two or more different booklets on the
same sheet. The booklets are arranged in the Cut & Stack
method.
● Perfect Bound—A book-finishing technique in which the spine
fold is trimmed and the edges of the gathered pages are
roughened and glued together—for example, in hardcover
books.
○ Stacking mode for VDP—For VDP jobs only. This option
enables you to print two or more different booklets on the
Imposition tab in the job parameters window 177