Konica Minolta bizhub PRESS C1100 - Manual (Page 200)

Parameter Option Description
Contrast Controls the difference between the light tones and the dark tones
in your image. The options range from Less, which makes the job
10% lighter to More, which makes the job 10% darker. Contrast is
generally used to make last-minute adjustments to the job after
proofing. By adjusting the Contrast setting, you can control the
difference between the light tones and the dark tones in your
image.
Gradation Contains a list of gradation tables that were created in the IC-312
print controller Gradation Tool window. Each gradation table
contains specific settings for brightness, contrast, and color
balance.
In addition to the gradation tables created in the IC-312 print
controller, the following default gradation tables are available:
● None—Applies maximum dry ink coverage. This is the default
setting.
● Cool—Makes blue tones appear clearer.
● Lively—Increases the color saturation.
● Saturated—Increases the strength (chroma or purity).
● Sharp—Increases the contrast.
● Warm—Sets the hues in the low densities to a bright reddish
color.
When you select your predefined gradation table, your job is
adjusted according to the specific table's settings.
Toner saving Total toner
coverage Toner limiting—Toner saving reduces the amount of the color
value in order to save on toner usage.
You can select from the following:
● Normal
● High
● Very High
Toner saving GCR—Gray component replacement (GCR) conserves toner by
replacing the gray component in pixels with black toner.
Provides the following options:
● Normal—Displays a smoother image quality.
● High—Displays a less smooth image quality (adds black to
flesh tones).
190 Chapter 11—Job parameters