Konica Minolta bizhub PRESS C1100 - Manual (Page 55)

c. Push down on the device until you hear a beep.
A message appears on the monitor indicating that the
device is calibrating.
d. Release the device when you hear a beep indicating that
the calibration is complete.
3. From the Tray drop-down list, select the tray from which you
want to print.
The paper size in the selected tray appears.
Note: There is no need to change the default settings for Screening or
Engine Calibration.
4. In the Number of copies box, enter the number of copies you
want to print.
5. If you do not want to print a calibration chart continue with step
9 on page 28 .
6. Click Print.
The calibration chart prints using the standard screen and
resolution of 1200 dpi.
7. Collect the chart from the printer.
Creating calibration tables with the Konica Minolta FD-5 spectrodensitometer 45