beautypg.com

Printing a spot color variation, Protecting specific colors – Konica Minolta bizhub PRESS C1100 User Manual

Page 110

background image

7. To select a different brightness setting for the selected color

patch, click a color patch under Brightness.
The K value of the selected color patch is increased or
decreased according to your selection.

8. Click Select.

9. Click Apply.

The spot color with the new values is added to the custom
dictionary.

10. Click Close.

Printing a spot color variation

Print a spot color variation chart.

Requirements:

The printer must be connected.

1. From the Tools menu, select Spot Color Editor.

2. In the Color list, type the name of the spot color or browse to

the spot color, and then select the spot color that you want to
change.

3. Click the Variations

button.

The Variations dialog box appears. The spot color is in the
center of the color patches and is marked 0.

4. Select the desired color patch.

5. Click Print Variations.

6. Do the following:

In the Tray list, select the desired tray.

In the Screening list, select the desired screening method.

In the Calibration list, select the desired toner coverage.

To print the variations without a background, clear the Print
with background
check box.

7. Click Print.

Protecting specific colors

Using the Spot Color Editor, you can protect specific colors—for
example, official logos or company colors—to help produce color
fidelity and color consistency between devices. When you define a
specific color as an RGB, CMYK, or gray spot color and enter a
fixed CMYK target for it, the IC-312 print controller treats the
selected color as a spot color and protects it.

100

Chapter 7—Managing color

This manual is related to the following products: