Konica Minolta bizhub PRESS C1100 - Manual (Page 44)

10. Insert the i1 iSis calibration chart into the front of the i1 iSis
making sure the left side of the chart is aligned on the left of
the iSis.
11. In the Measure Calibration Chart window, click Start.
The iSis starts the calibration process and its progress is
shown in the Measure Calibration Chart window.
After the i1 iSis calibration chart is successfully scanned, the
Save page of the Calibration wizard appears.
34 Chapter 3—Calibration