Konica Minolta bizhub PRESS C1100 - Manual (Page 104)

Note: Some PANTONE colors in the PANTONE PLUS color dictionary have
the same name as PANTONE colors in the legacy PANTONE color
dictionary. Therefore, in the Spot Color Editor the word Plus was added to
PANTONE PLUS color names to help you distinguish between colors in the
two libraries. In the job parameters window, the Use Legacy Pantone
Library check box enables you to select which PANTONE library you want
to use.
See also:
Adding a spot color - Global Library on page 94
Editing a spot color - Global Library on page 95
Deleting a spot color - Global Library on page 95
Adding a spot color - Media type library on page 96
Editing a spot color - Media type library on page 96
Deleting a spot color - Media type library on page 97
Test–printing spot colors on page 97
Measuring a spot color with the X-Rite i1 spectrophotometer
on page 98
Spot color variations overview on page 98
Protecting specific colors on page 100
Color tab in the job parameters window on page 187
Adding a spot color - Global Library
1. From the Tools menu, select Spot Color Editor.
2. In the Spot Color Editor dialog box, click Add.
3. Type the new color name as it is in the original file.
Note: The spot color names are case sensitive and should match the
names that appear in the original file.
4. Change the CMYK values, displayed on the right side of the
Spot Color Editor window, as required.
5. Click Save.
6. Click Close.
The new color is added to the custom dictionary.
If you created a new spot color for an RTP job, re-RIP the job
before printing.
94 Chapter 7—Managing color